Skip to content

Choose a plan · Port 25 open

VPS for a mail server paid in Bitcoin: which plan and how much RAM

How much memory a mail server needs, what decides whether your mail is delivered, and which Nymhost plan fits, paid in crypto only: Bitcoin, USDT, Monero or four other coins. Outbound port 25 is open on every VPS; the step-by-step build has its own tutorial.

Updated By Nymhost LLC11 min read

VPS for a mail server, in short

A VPS for a mail server needs a dedicated IPv4 address, outbound port 25, a clean IP reputation and enough memory for the software you install. Every Nymhost VPS has a dedicated IPv4 and an open outbound port 25. As a VPS mail server, Offshore 2 ($4.89 a month) or Global 2 ($3.19), both with 2 GB of RAM, run Postfix and Dovecot for a few mailboxes; a packaged suite with antivirus needs 6 to 8 GB. Spam and bulk email are forbidden. Check the IP on a blocklist and ask support about reverse DNS before you depend on it. When you are ready to build it, follow the email server setup tutorial.

Why run your own mail server on a VPS

A VPS mail server gives you mailboxes on your own domain without a hosted provider reading, scanning or suspending them. It is also real work: you carry the security updates, the DNS, the reputation of your IP address and the backups.

Home connections are a poor base for it. The Mail-in-a-Box guide counts internet providers that block port 25 among the reasons not to run a mail server at home. On a Nymhost VPS, outbound port 25 is open on every plan. This is a deliberate choice, and it comes with one rule: no spam and no bulk email. A VPS used for either is suspended.

This page is for personal and small-business mail: your own address, a few people, normal volume. Newsletters, cold outreach and mailing lists at scale are not what a Nymhost VPS is for, and the acceptable use rules say so.

Best VPS for a mail server: how much RAM

When you pick a VPS for an email server, memory decides the plan. A plain Postfix and Dovecot pair, with no antivirus and no webmail, is light. Add a spam filter, an antivirus engine, a database and a web interface, and the needs jump. Two official figures show where the line is:

  • mailcow (Docker suite with webmail, spam filter and antivirus): at least 6 GiB of RAM plus 1 GiB of swap on the default configuration, 20 GiB of disk before any mail, and 8 GiB recommended for about 5 to 10 users. Switching off ClamAV and the search engine (SKIP_CLAMD=y, SKIP_FTS=y) saves memory. Its documentation supports KVM and rules out OpenVZ, Virtuozzo and LXC; every Nymhost VPS runs on KVM, with its own kernel.
  • Mail-in-a-Box (one-box installer): Ubuntu 22.04, at least 512 MB of RAM, 1 GB recommended. Nymhost offers Ubuntu 22.04, so it fits on any plan.

The vCPU are shared cores, while the RAM and the NVMe space of your plan are reserved for your VPS. Disk is rarely the limit for a few mailboxes, but attachments add up: the 2 GB plans have 40 GB of NVMe, Offshore 8 has 160 GB. The table matches common mail setups to a starting plan.

No plan includes backups, so mail you cannot lose needs a copy on another machine; the tutorial has a mailbox backup routine.

Memory needs from the mailcow and Mail-in-a-Box documentation, read 18 November 2026. Nymhost 1-month prices of 18 November 2026 (Offshore / Global); 3 months save 10%, 6 months 20%, 12 months 30%.
Mail setupWhat it asksPlan to start with1 month
Postfix and Dovecot, a few mailboxesTwo small services, no databaseOffshore 2 or Global 2 (2 GB)$4.89 / $3.19
Postfix, Dovecot, OpenDKIM and a spam filter such as RspamdA filter process and its cache next to the mail servicesOffshore 4 or Global 4 (2 vCPU, 4 GB)$8.19 / $6.39
Mail-in-a-Box512 MB minimum, 1 GB recommended, Ubuntu 22.04Offshore 1 (1 GB); a 2 GB plan leaves room$3.09
mailcow, default configuration with ClamAV6 GiB plus 1 GiB swap minimum; 8 GiB for about 5 to 10 usersOffshore 8 or Global 8 (4 vCPU, 8 GB)$13.49 / $19.19
mailcow with about 15 phones syncing and 50 IMAP connectionsPlan for 16 GiBOffshore 16 (16 GB) or Global 24 (24 GB)$20.49 / $29.39

From plan to working mail server: six steps

Once the VPS is running, the build takes an afternoon. In short:

  1. Set the hostname to mail.example.com, publish the A and MX records, and open ports 25, 80, 587 and 993.
  2. Get a Let's Encrypt certificate, with a hook that reloads the mail services after each renewal.
  3. Configure Postfix to receive on port 25, accept logged-in users on port 587 and refuse to relay for anyone else.
  4. Configure Dovecot 2.3 or 2.4 for IMAP on port 993, Maildir storage and password checks for Postfix.
  5. Sign outgoing mail with DKIM and publish SPF and DMARC.
  6. Test TLS, relaying, authentication headers and blocklists, then schedule backups.

Every command, both Dovecot configurations and a troubleshooting table are in email server on a VPS: the full setup tutorial.

Choose a city and a system

Pick the city nearest to the people who read the mail. The IP address is registered in the country of the city, and geolocation databases decide for themselves how to label it. The offshore range runs in Amsterdam, Reykjavik, Zurich and Bucharest (see offshore VPS and Zurich VPS); the Global range adds New York, Dallas, Los Angeles, London and Frankfurt, and an Amsterdam VPS is available in both.

For the system, Debian 13 ships Dovecot 2.4, while Debian 12 and Ubuntu 24.04 ship Dovecot 2.3, with a different configuration syntax. The tutorial gives a file for each version, so any of the three works.

DNS records a mail server needs

Publish these records at your DNS host before the first message leaves. Here is what each one does; the exact values, including the DKIM key and a DMARC rollout plan, are in steps 1 and 6 of the tutorial.

DNS records for a single-domain mail server, with example names. SPF syntax per RFC 7208, read 18 November 2026.
RecordName (example)What it does
Amail.example.comPoints the mail hostname at your VPS IPv4 address
MXexample.comTells other servers where to deliver your mail
TXT (SPF)example.comLists the hosts allowed to send for the domain, for example v=spf1 mx -all
TXT (DKIM)mail._domainkey.example.comPublishes the public key that signs your messages
TXT (DMARC)_dmarc.example.comSays what receivers do when SPF and DKIM fail, and where to send reports

SPF allows at most 10 DNS-lookup terms (RFC 7208, section 4.6.4); a single mx term stays far below that.

IP reputation and blocklists

Receiving servers judge your mail largely by your IP address. A data center address was used by someone else before, or sits in a range other customers share, and some receivers distrust data center ranges by default. Mail-in-a-Box warns that a new server can be given an address that is already on a spam blocklist; it suggests checking with a lookup tool such as MXToolbox and asking the provider for a clean address if needed.

Check your address on a blocklist lookup before you move any mail to it, and again after a few weeks. If it is listed, ask support whether another address is possible; do not count on one. Nymhost cannot guarantee that any receiver accepts your mail, and no provider can.

The rules of the largest receivers are public. Google's sender guidelines, in force since 1 February 2024, ask everyone who sends to Gmail for SPF or DKIM, valid forward and reverse DNS, a TLS connection and a spam rate under 0.3 % in its Postmaster Tools. Above 5,000 messages a day they add DMARC, domain alignment and one-click unsubscribe for marketing mail, volumes a personal server never reaches. Delivery to the biggest mailbox providers is the hardest part of self-hosting; for important mail, some people send through an outbound relay service while keeping their own inbound server.

Send mail from a VPS: SMTP for your own domain only

A send-only SMTP VPS is a common setup: an application, a website or a few people sending from your own domain. Install Postfix, keep the submission service on port 587 with login and TLS, publish SPF, DKIM and DMARC, and send. You can leave out Dovecot if nobody reads mail on the server, but Postfix then needs another way to check passwords, or it should accept mail only from programs on the VPS itself. The guide to send email from a VPS has that send-only setup, msmtp for scripts and the relay option.

The limits are the same as for a full server: mail for your own domain, to people who expect it. Port 25 is open for delivery, not for volume. Newsletters to bought lists, cold outreach and anything that looks like bulk sending get the VPS suspended.

Webmail on a VPS: a desktop client or Roundcube

A hand-built Postfix and Dovecot server has no webmail. You read mail in a desktop or phone client over IMAP, which is all most people need. For a browser interface there are two routes:

  • Roundcube on the same VPS. Its installation guide asks for a web server with PHP and a database (MySQL is the most common; PostgreSQL and SQLite also work), and it tells you to remove the whole installer directory once setup is done, because a forgotten installer can expose the configuration and its passwords. Serve it over HTTPS only.
  • A packaged suite such as mailcow, which includes webmail along with the spam filter and antivirus, at the memory cost shown in the table above.

Either way, webmail adds a service to update and a login page exposed to the internet, so count it in the plan: a web server and a database sit next to the mail services. The webmail on a VPS guide installs Roundcube on top of the Postfix and Dovecot tutorial.

What is forbidden on a Nymhost mail server

Port 25 is open so you can run your mail. The rules on spam and abuse are strict about the rest.

Forbidden, VPS suspended

  • Spam and bulk email, including newsletters to people who did not ask
  • Phishing and mail that impersonates other people
  • Malware or botnet control through mail
  • Open relays: a misconfigured Postfix that forwards for anyone

Fine

  • Your own mailboxes on your own domain
  • Mail for a family, a team or a small business
  • Mail forwarding for addresses you own

Nymhost is not bulletproof hosting: spam, phishing, malware, botnet control, attacks and child sexual abuse material lead to suspension. Copyright notices are a separate matter. A person reads each one, DMCA notices included, and forwards it to you so you can answer; a notice alone does not suspend the VPS. Nymhost acts on a valid court order or another legally binding request. Read how Nymhost handles notices.

Pay for a mail server VPS in Bitcoin, USDT or Monero

Crypto is the only way to pay for a Nymhost mail server: Bitcoin, USDT on Tron or Ethereum, USDC, Ethereum, Solana, Litecoin or Monero, with no card, PayPal or bank transfer. Each payment tops up a balance by $25 or more, and that balance never expires, which suits a mail server whose IP address you should test before you trust it: rent Global 2 for 1 month ($3.19), look the address up on a blocklist, and keep the rest for the plan you stay on. Bitcoin is credited after 2 confirmations, about 20 minutes on the checkout, and USDT on Tron after 20, about 2 minutes; see how a Bitcoin or USDT top-up works.

VPS mail server plans

Offshore 2 or Global 2 to start a hand-built Postfix and Dovecot server; 8 GB or more for a packaged suite with antivirus. You can pay in Bitcoin, Monero or USDT, and a person builds the VPS once the payment is confirmed, usually within minutes. See the full anonymous VPS hosting offer or the pricing page.

Nymhost Offshore

Amsterdam · Reykjavik · Zurich · Bucharest

Offshore 1

$3.09/ month

3 mo $8.346 mo $14.8312 mo $25.95

  • 1 vCPU
  • 1 GB RAM
  • 20 GB NVMe
  • 2 TB traffic
Deploy Offshore 1

Offshore 2

$4.89/ month

3 mo $13.206 mo $23.4712 mo $41.07

  • 1 vCPU
  • 2 GB RAM
  • 40 GB NVMe
  • 4 TB traffic
Deploy Offshore 2

Offshore 4

Best balance

$8.19/ month

3 mo $22.116 mo $39.3112 mo $68.79

  • 2 vCPU
  • 4 GB RAM
  • 80 GB NVMe
  • 8 TB traffic
Deploy Offshore 4

Offshore 8

$13.49/ month

3 mo $36.426 mo $64.7512 mo $113.31

  • 4 vCPU
  • 8 GB RAM
  • 160 GB NVMe
  • 12 TB traffic
Deploy Offshore 8

Offshore 16

$20.49/ month

3 mo $55.326 mo $98.3512 mo $172.11

  • 8 vCPU
  • 16 GB RAM
  • 320 GB NVMe
  • 20 TB traffic
Deploy Offshore 16

Nymhost Global

New York · Dallas · Los Angeles · London · Amsterdam · Frankfurt

Global 2

$3.19/ month

3 mo $8.616 mo $15.3112 mo $26.79

  • 1 vCPU
  • 2 GB RAM
  • 40 GB NVMe
  • 2 TB traffic
Deploy Global 2

Global 4

$6.39/ month

3 mo $17.256 mo $30.6712 mo $53.67

  • 2 vCPU
  • 4 GB RAM
  • 65 GB NVMe
  • 2 TB traffic
Deploy Global 4

Global 6

$9.59/ month

3 mo $25.896 mo $46.0312 mo $80.55

  • 2 vCPU
  • 6 GB RAM
  • 120 GB NVMe
  • 6 TB traffic
Deploy Global 6

Global 8

$19.19/ month

3 mo $51.816 mo $92.1112 mo $161.19

  • 4 vCPU
  • 8 GB RAM
  • 160 GB NVMe
  • 12 TB traffic
Deploy Global 8

Global 24

$29.39/ month

3 mo $79.356 mo $141.0712 mo $246.87

  • 8 vCPU
  • 24 GB RAM
  • 400 GB NVMe
  • 12 TB traffic
Deploy Global 24

Prices in US dollars, checked on 18 November 2026. Paid from a crypto balance (minimum top-up $25); 3, 6 and 12 months save 10, 20 and 30%. Every plan: KVM, root over SSH, 1 dedicated IPv4 + /64 IPv6, shared 1 Gbit/s port.

VPS for email server: before you choose a plan

Is outbound port 25 really open on a Nymhost VPS?

Yes. Outbound port 25 is open on every Nymhost VPS, so a mail server can deliver to other servers directly. Sending spam or bulk email is forbidden and gets the VPS suspended.

How much RAM does a VPS mail server need?

A basic Postfix and Dovecot install is small, and 2 GB leaves comfortable room for a few mailboxes. The mailcow documentation lists a minimum of 6 GiB RAM plus 1 GiB swap for its full suite and recommends 8 GiB for about 5 to 10 users. Mail-in-a-Box asks for 512 MB and recommends 1 GB.

What is the best VPS for a mail server?

The best one has a clean IPv4 address, an open port 25 and enough memory for what you install. On Nymhost that means Global 2 or Offshore 2 for a light setup, or Offshore 8 for a suite. A clean IP matters more than extra CPU, so test the address first.

Can I send email from a VPS for my own domain only?

Yes. Install Postfix, keep only the submission service on port 587 with login, publish SPF, DKIM and DMARC, and send mail for your own domain. The same rules apply as for a full mail server: no bulk or unsolicited mail.

Does a Nymhost VPS come with email accounts?

No. A Nymhost VPS is a Linux server with root access, not a hosted mail service: there are no mailboxes until you install the mail software yourself. What the VPS gives you is a dedicated IPv4 address and an open outbound port 25, which is what self-hosted mail needs.

Can Nymhost set reverse DNS (PTR) for my IP?

It is not a published feature, so ask first. Email [email protected] and say which IP and hostname you need. Most receivers expect a PTR record that matches your mail hostname, so wait for the answer before relying on the server.

Why does my mail go to spam?

Usually a missing PTR, a failing SPF or DKIM check, a listed IP or a brand-new address with no history. The tutorial has a table of symptoms, causes and checks to work through in order.

Can I host my mail without giving any identity?

Yes, the VPS needs no ID and no email address; see what a no-KYC VPS keeps about you. Your domain registrar and your DNS host have their own rules, so check them. Public records for the domain, such as MX and SPF, are visible to everyone.

Sources

  1. Prepare your system (mailcow: dockerized documentation) mailcow
  2. Mail-in-a-Box setup guide Mail-in-a-Box
  3. Email sender guidelines Google
  4. Roundcube installation Roundcube
  5. RFC 7208: Sender Policy Framework (SPF) IETF